Walking Cane Series

The Third Build in my Walking Cane Series . I have a friend that has recently been using a cane allot , so I decided to take a break from luthery to make him a cane . He was a Carpenter most of his Life So I thought a 24oz Framing hammer was appropriate . The head was formed to allow for proper hand size and the proportions based on that .

I then started the handle , I had intentioned at first to make it full length but the proportions did not look right . I cut the handle down to the proper size and it will have a 1" maple dowel coming out of the bottom of the handle with a rubber cane tip applied .

The Square at the base of the handle will be remover after its drilled for the Dowel.

Tried to make the transition into the head look as close to the old style Maple / Hickory handles

Thanks for stopping by . Have a great day .